|
| ELECTRICAL
SPECIFICATIONS | PHYSICAL
SPECIFICATIONS |
APPLICATION
OVERVIEW
 
The SITCO CATV Series antenna arrays are designed for the cable
system "head-end" sites. This series fills the need
for high gain deep fringe antenna arrays.
The SITCO CA-Series arrays are specifically tuned and cut to the
individual channel (one channel only). With high gain and sharp
forward pattern, these arrays will insure excellent picture
quality, due to the reduction in multipath signal
"pick-up".
The antennas shown above are equipped with a balun transformer
and a 75 ohm "F" connector termination. Standard
models include clamps for masts as large as 1-1/2" OD.
Clamps for larger masts should be specified.
|
